[Shine]

Dear Singh,

Ok, I will do…..Thank you for your help…..Thank you very much

Regards,

Shine K P

[Shine]

Dear Singh,

As you advised, I have connected PNP transistor and see the below changes observed

1)LED is glowing when the power is ON

2)LED getting off after few seconds and getting ON automatically even I do not press switch

3)While pressing the switch also, the LED is glowing and gets off after few minutes

Since it is getting ON and OFF automatically (even if I don't press switch), I have connecetd Diode between pin 11 and 1 (instead of 2 and 11), Now the LED is getting ON while I power ON but after few seconds it gets off and it is getting ON while I press switch and gets off after a period. Now the problem I face is , while power on first time, the LED gets ON for few seconds.

Please advise, what to do….Is it right, if I connect diode between pins 11 and 1?

Regards,

Shine 

[Shine]

Dear Singh,

I did the same as you suggested but it is not immedaitly on the light when I press the switch but it turns on after 30 seconds and switchs it off after 30 seconds automatically. What could be the fault.I need to turn the light on immediatly I press the switch and the rest is ok.

Please help me…Hope I am not bothering you.

Regards,

Shine

[Shine]

Dear Singh,

Thanks…Happy Diwali to you and fly…..Let check my  bread board connections…..

Thanks again

Regards,

Shine

[Author]

Posts