EngineersGarage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise
You are here: Home / Topics / Solar power

Solar power

|

Projects › Projects › Solar power

  • This topic has 1 reply, 2 voices, and was last updated 7 years, 2 months ago by GANEEV SINGH.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 17, 2011 at 9:41 am #1449
    Julian
    Participant

    Hi, I’m an engineering student who has never done any solar projects before. I’ve searched many websites yet the info is very limited. I want to build a solar charge controller. I found some circuits online but i have a few questions : 

    1.   if the solar charge controller circuit requires a 12V solar panel, can i use 2 6V solar panels? if can, should i connect the 2 solar panels serially or in parallel?

    2.   if i just want to generate an output of 5V from the circuit, can i just use a 5V panel? and how do i relate the current and power? 

    3.   The type of rechargeable batteries used for solar charge controller is normally the lead acid ones? can i use nornal rechargeable batteries? 

    Help will be much appreciated. ;)

    February 19, 2018 at 8:39 am #14750
    GANEEV SINGH
    Participant

    Hi Julian

    I will like to answer your doubts in order they have been asked:-

    1.Yes you can use two 6V panels instead of single 12V panel. You should connect these two 6V solar panles in series in order to get 12V.

    2.If you want 5V output from circuit, it is better to use a solar panel which can provide voltage greater than 5V. This wil help the circuit to perform well enough. Now here's a basic thing related to batteries or voltage sources; when you connect them in parallel you tend to increase their current capacity and when you connect them in series their voltage increases. So if you want a better power source, with same voltage rating, you should connect solar panels in parallel. I hope this clears your current and power relation doubt.

    3.Yes you can use normal rechargeable batteries as well, just make sure these batteries do meet the current and voltage requirements of the circuit.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Log In

RSS Recent Posts

  • LED circuit for 1/6 scale diorama May 15, 2025
  • stud mount Schottky diodes May 14, 2025
  • using a RTC in SF basic May 14, 2025
  • Hi Guys May 14, 2025
  • Can I use this charger in every country? May 14, 2025

Stay Up To Date

Newsletter Signup
EngineersGarage

Copyright © 2025 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media
Privacy Policy | Advertising | About Us

Search Engineers Garage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise