EngineersGarage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise
You are here: Home / Topics / POWER GRID SYNCHRONISATION FAILURE ON SENSING FREQUENCY AND VOLTAGE USING 8051 MCU.

POWER GRID SYNCHRONISATION FAILURE ON SENSING FREQUENCY AND VOLTAGE USING 8051 MCU.

|

Microcontroller › 8051 › POWER GRID SYNCHRONISATION FAILURE ON SENSING FREQUENCY AND VOLTAGE USING 8051 MCU.

  • This topic has 2 replies, 2 voices, and was last updated 10 years, 8 months ago by sourabh Sandal.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 30, 2014 at 7:40 pm #3281
    sourabh Sandal
    Participant

    I am working on project title,”Power grid syncronisation failure on sensing frequency and voltage using 8051 MCU”.I want help for the project and circuit diagram releated to this project.Kindly help me. 

    October 9, 2014 at 11:57 am #12274
    AJISH ALFRED
    Participant

    Hi,

    What kind of help would you require?

    October 12, 2014 at 10:33 am #12275
    sourabh Sandal
    Participant

    I have seen this project Titled ,”DETECTING POWER GRID SYNCHRONISATION FAILURE ON SENSING FREQUENCY OR VOLTAGE BEYOND ACCEPTABLE RANGE”.

    I have found the block diagram for the project as follow:

    wysiwyg_imageupload:13620:

    I required guidance for the 8051 MCU and interfacing it with LCD,variable voltage source ,Variable frequency and relay driven circuit.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Log In

RSS Recent Posts

  • Why can't I breadboard this oscillator? June 15, 2025
  • Failure of polypropylene motor-run capacitors June 14, 2025
  • a point I can't understand about the sinc expression June 14, 2025
  • Quick advice on remote car starter? June 14, 2025
  • Wideband matching an electrically short bowtie antenna; 50 ohm, 434 MHz June 14, 2025

Stay Up To Date

Newsletter Signup
EngineersGarage

Copyright © 2025 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media
Privacy Policy | Advertising | About Us

Search Engineers Garage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise