“Help on writing code for the project”

[kallappa]

hi sir
we are doing project on “automatic load shedding using gsm” , our idea is to control two or more relay through SMS .
sms format is “<relay number ><status><time of operation>”    status means ON/OFF.
  In this project we are controlling ‘2’ number of relays (According to the availability of ports in the MC) that are connected directly to the power lines. And these relays are driven by a micro controller unit. In this micro controller unit we are employing one timer/RTC (real time clock) for the desired delay (Line off time), say suppose it is 30 min., we have to turn off line 1. for 30 min and after 30 min. again we have to turn it ON and turn OFF line 2. for 30 min and so on. We should program the micro controller according to above-mentioned idea. And one more thing is, the user should be able to adjust the delay. That is, the system should accept some inputs given by the user. That is, we are employing one GSM mobile and an LCD to enter the desired delay and once the delay is entered then the system will work with that delay till the next change given by the user..

PLEASE HELP US SIR  AND SEND THE CODE FOR THE ABOVE IDEA .

WE ARE USING FOLLOWING HARDWARE
 

1. Micro Controller(P89c51RD2)
2. RTC chip (DS1307)
3. Relays
4. GSM Module

PLEASE REPLY SIR SEND US CODE FOR ABOVE IDEA
ITS HUMBLE REQUEST

[dagakshay]

hi kallappa, 

first of all i would say a very nice project…

we are here to solve the quries… you tell us till where you have reached.. where exactly you got srtuct…just asking for code is never been considered as a humbel request…. 

please it my humbel request dont ask for code rather then you can ask the problem you facing….

all d bst

 

[nilesh]

please reply lcd coding

 

[Author]

Posts