EngineersGarage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise
You are here: Home / Topics / GLCD programming pic24ep512gu810

GLCD programming pic24ep512gu810

|

Microcontroller › PIC › GLCD programming pic24ep512gu810

  • This topic has 1 reply, 2 voices, and was last updated 6 years, 4 months ago by sumit.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 27, 2017 at 7:30 am #4649
    deepika
    Participant

    am working on 128×64 GLCD using pic24ep512gu810. all control pins and data pins are connected at PORTD . portD7 to portD14 are data pins RST-RD0,CS2-RD1,CS1-RD2,E1-RD4,R/W-RD5,RS-RD6. when we are passing data to data bus, control signals may be affected. AM writing the code like this…please modify 

    #define Blinking_LED PORTBbits.RB9
    #define Index0 0x40
    #define Index1 0x50
    #define Index2 0x60
    #define Index3 0x70
    #define Index4 0x80
    #define Index5 0x90
    #define Index6 0xA0
    #define Index7 0xB0
     
    #define DataBusLCD   PORTD
    #define RegisterSelect          PORTDbits.RD6
    #define EnableLCD   PORTDbits.RD4
    #define ChipSelect1 PORTDbits.RD2
    #define ChipSelect2 PORTDbits.RD1
    #define ResetLCD     PORTDbits.RD0
    #define DataBusLCD_Dir          TRISD
     
     
    #define Enable 1
    #define Disable 0
     
    #define DisplayON 63
    #define DisplayStartLine 192
     
    #define Command 0
    #define Data 1
     
    #define LeftChip 1
    #define RightChip 2
    #define BothChip 3
     
    const unsigned char ptrArray [] = {
    0x0F, 0x10, 0x20, 0x40, 0x40, 0x20, 0x10, 0x0F, 0x00, 0x00, 0x42, 0x41, 0x7F, 0x40, 0x40, 0x00,
    0x00, 0x00, 0x00, 0x63, 0x63, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x3C, 0x42, 0x81, 0x81, 0x81, 0x81, 0x00, 0x00, 0x00, 0x42, 0x41, 0x7F, 0x40, 0x40, 0x00,//0,1
    0x00, 0x00, 0x00, 0x63, 0x63, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,//2,3
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,//4,5
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,//6,7
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    };
    int main()
    {
    InitializeGraphicalLCD();
    DisplayPicture(ptrArray);
    while(1)
        {
    //        FillScreen();
           // ClearScreen();
    Blinking_LED = ~ Blinking_LED;
        }
        return 0;
    }
    void InitializeGraphicalLCD(void)
    {
    //    ConfigureLCDPINsDirection(Output);
    _TRISD = 0;
    _TRISD6 = 0;
    _TRISD4 = 0;
    _TRISD2 = 0;
    _TRISD1 = 0;
    _TRISD0 = 0;
        
       
        RegisterSelect = Command;
        EnableLCD = Enable;
        DataBusLCD = Disable;
        ChipSelect1 = Disable;
        ChipSelect2 = Disable;
        
        ResetLCD = Disable;
        WriteCommandToLCD(DisplayON, BothChip);
        WriteCommandToLCD(DisplayStartLine, BothChip);
    //     ClearScreen();
    }
    void ChipSelection(unsigned char Chip)
    {
        if(Chip == 1)
        {
             ChipSelect1 = Enable;
             ChipSelect2 = Disable;
         }
        else if(Chip == 2)
        {
            ChipSelect1 = Disable;
             ChipSelect2 = Enable;
        }
        else
        {
            ChipSelect1 = Enable;
             ChipSelect2 = Enable;
        }
    }
    void ToggleEnablePin(void)
    {
        EnableLCD = Enable;
        EnableLCD = Disable;
    }
    void WriteCommandToLCD(unsigned char CommandToLCD,unsigned char SelectChip)
    {
         //sending data to LCD
        ChipSelection(SelectChip);
        RegisterSelect  = Command;
        DataBusLCD = CommandToLCD;
        ToggleEnablePin();    
    }
    void WriteDataToLCD(unsigned char DataToLCD,unsigned char SelectChip)
    {
        //sending data to LCD
        ChipSelection(SelectChip);
        RegisterSelect  = Data;
        DataBusLCD = DataToLCD;
        ToggleEnablePin(); 
        
    }
    void WriteAddressToLCD(unsigned char AddressX,unsigned char AddressY,unsigned char SelectChip)
    {
        //sending x address
        WriteCommandToLCD(AddressX,SelectChip);
        //sending x address
        WriteCommandToLCD(AddressY,SelectChip);
    }
    void DisplayPicture(const unsigned char *ptrArray)
    {
        unsigned char X =0,Y=0,Page0,Page;
        Page = Page0;
    for(X=0;X<8;X++)
        {
            WriteAddressToLCD(Page,Index0,LeftChip);
         for(Y=0;Y<64;Y++)
        {
    WriteDataToLCD(*ptrArray++,LeftChip);
    }
         WriteAddressToLCD(Page++,Index0,RightChip);
    for(Y=0;Y<64;Y++)
            WriteDataToLCD(*ptrArray++,RightChip);
        }
    }
    please suggest me its my first project in GLCD….it is urgent requirement…

     

    January 11, 2019 at 9:48 am #15002
    sumit
    Participant

    why there is no delay ToggleEnablePin function….there must be some delay of few microseconds to generate a pulse while sending data or command

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Log In

RSS Recent Posts

  • 12v battery, 18v magic May 23, 2025
  • JBL charge 4 dead motherboard? May 23, 2025
  • Back to the old BASIC days May 23, 2025
  • Reclaiming missing motherboard header May 23, 2025
  • Need help in repairing a dead motherboard May 23, 2025

Stay Up To Date

Newsletter Signup
EngineersGarage

Copyright © 2025 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media
Privacy Policy | Advertising | About Us

Search Engineers Garage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise