Forum Replies Created
-
AuthorPosts
-
March 18, 2015 at 1:39 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #12704lakshmeeshaParticipant
Sorry for late replay, I have lost every codes, i cant get them back. Sorry if i do new ill inform you.
July 26, 2013 at 6:22 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10224lakshmeeshaParticipantohh,,, always.
email : ladaka3 @ gmail . com
July 26, 2013 at 5:01 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10222lakshmeeshaParticipantwhat kind of projects u want to do?
July 26, 2013 at 9:52 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10209lakshmeeshaParticipantthees are the functions, that i used.
LINK:
dl.dropboxusercontent.com/u/65490926/EEPROM.rar
July 25, 2013 at 1:04 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10201lakshmeeshaParticipantyou mean, after 0Xff value? for 1 location?
ive changed location ,
while reading : read and add both
Write_Byte_To_24LC64_EEPROM(0x0010, temp);Write_Byte_To_24LC64_EEPROM(0x0015, temp1);readingy=Read_Byte_From_24LC64_EEPROM(0x0010);y=y+Read_Byte_From_24LC64_EEPROM(0x0015);June 13, 2013 at 8:51 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9965lakshmeeshaParticipantyes, i’m using that oly, NXP 89v51RD2FN (serial programming supported), im almost in final stage
June 11, 2013 at 10:38 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9944lakshmeeshaParticipantfor my case, i need more values per 1 rotation, In EFY project they compared it with real time, im counting that in seconds only, only one magnet and reed switch will not gives continous values
lakshmeeshaParticipantin one line,,,
a=(TH1<<+TL1; //shifting TH1 left to 8 bit, adding TL1
May 29, 2013 at 12:48 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9862lakshmeeshaParticipanti need to attach magnet to wheel right??
on that fast magnet will thrown away…..
lakshmeeshaParticipantif i want bigger fonts, what i have to do?
lakshmeeshaParticipantOMG!!!!!!!!!!!!..
Sorryyyyyyyyyy sorryyyyyy… i’ve done mistake here, i’ve choosen AMPIRE 128*64 glcd in protuse,, thats why that code is not worked,
Now choosed LMG12641BS1R GLCD working perfectly…………………….
sory for this thread
lakshmeeshaParticipantHellooo
May 24, 2013 at 2:53 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9817lakshmeeshaParticipanthey….would you suggest me a good sensor for wheel sensing, i must counts more that 100hz (100 pulse),the wheel having 5 alloy sticks, it will disturb ir signal and have to get pulse from it, is IR sensors with amplifier is ok??May 23, 2013 at 12:39 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9814lakshmeeshaParticipantyes,, i did it,, finally its running with eprom (ic2), i ‘m saving trip value and top speed in it. now planning to interface GLCD to it, already hex files reached 22kb, and getting address overflow with some more variables
May 20, 2013 at 5:10 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9797lakshmeeshaParticipantThanxxx…..
its kind of over,
but im failed to interface EPROM to it, showing overflow error,,
-
AuthorPosts