Forum Replies Created
-
AuthorPosts
-
jayParticipant
call me for that
jayParticipanthi all.
i had same problem of not calling.
please download atcommand set pdf file from net and do as guided in it. if still not working please check your pwr supply. it must be atleast 2 amp for calling.
August 3, 2013 at 4:51 pm in reply to: AUTOMATIC ROOM LIGHT ON / OFF WITH THE PRESENCE OF HUMAN #10266jayParticipanthi . f there is any other way to find presance of human body in room via temperature monitoring please let us know
July 29, 2013 at 1:28 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10239jayParticipantthanks lakshmeesha….
i am facin problem with file you send. it shows error that isin line <includs.h>
please send me sample code contains save and read comands.
jayParticipantthank you lakshmeesha..
i have included all as heder but err is there in line “includes.h”.
can you give me a sample code contain ths file to save and read.
July 26, 2013 at 6:28 pm in reply to: AUTOMATIC ROOM LIGHT ON / OFF WITH THE PRESENCE OF HUMAN #10225jayParticipanthi one can also use pir motion sensor but it is very sensitive and needs bootup time for about 1 mnut when pwr up.
July 26, 2013 at 6:15 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10223jayParticipantThanks lakshmeesha.
i will try to work on this files and let you know my side.
if i will face any problem i will ask you for help.
if posible can u give me your email id.
July 26, 2013 at 4:09 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10221jayParticipantthank you lakshmeesha…
i will try this file and let u know that i suceed or not else i will ask you for help.
July 26, 2013 at 5:19 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10207jayParticipantthamks lakshmeesha..
it seems that you are using one function fle that i dont know. i am usingf eg s eprom command.
if posiable send funcition file to me and others that we can learn.
it cauld be your header fle or c file which contains i2c commands thanks
July 17, 2013 at 3:08 pm in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #10156jayParticipanthi great project.
f you know how to nterface with i2c after 0xff add please let me know from your side
jayParticipanti can read and write wher i want on 1st page means 0x00 to 0xff.
what should i do to write or read after that addd. like 0x100.
and i learn from eg topics means “how to interface i2c eeprom with 8051”.
please help
i am using at 24c08 and want to extend to at24c512.
June 12, 2013 at 5:37 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9951jayParticipantInstad of read relay you can use hall sensors and multipel megnet. You can find hall sensor in old bldc fan of ups or pc smps or dvd or laptop
June 10, 2013 at 6:04 am in reply to: Motorbike cockpit (km/h, odometer, fuel gauge, bat level,RTC) using C52 #9927jayParticipanthi great project concept.
for speed nindicator you can refer to project published in efy “DIGITAL SPEEDOMETER CUM ODOMETER FOR MOTERBIKES”
hardware assembly shown in it and working very fine in my case. try is.
jayParticipantadd 1-1.5 second delay between two command
jayParticipanthi there
first you have to creat seril nturrept routeen for 9600 baud rate.
the get all command from user manule of r305. it is there. then creat string with that commands.
to add or scan first you have to
1. collect image,
2 store to buff-1
3 collect image again
4. store it to buff-2.
5. combine buff1 and buff-2 and generate tamplet
6. store that tamplet to your address.
i spent 12-13 days for it so i can understand your condition.
i have suscesfully made electronic votting machine with fingerprint module
-
AuthorPosts