Forum Replies Created
-
AuthorPosts
-
DhananjayaParticipant
thank u for advance… i have to try for ADC in microchip PIC16F676 for 3 channels (3 analog inputs i.e.RA0,RA1 & RA2)-AN0,AN1,AN2) please give me ADC configuration bits /ADC initialize…for this chip.in C code
email id [email protected]
DhananjayaParticipant
To get the input voltage from the voltage divider resistors voltage is 3.5 volts its not working but when i connect DC 3 volts its working good
The input to RA0 positive D/C voltage sufficient to indicate a logic "1" , when the phase is present, and a logic "0" when the phase is absent. how to convert TTL form as your sugession otherwise please let me ADC code…DhananjayaParticipantDear Sir,
I have sending SMS through this i.e GSM SIM300 with PIC16F877A microcontroller I have tested the code for GSM SIM response like OK it will display on LCD i have written code like this
unsigned char i;
char buffer[25];
i=0;
while(!RCIF)
bufer[i++]=RCREG;
buffer=’