You are here: Home
there are many trade offs in satcom systems…you first need make clear what bandwidth and data rates you want…following that need to chose a suitable architecture
must provide delays in ISR
you need to provide delays in ISR routines, otherwise this woon't work
you need to unbrick AVR and note that fuse values must be properly calculated from the datasheet…this is a common error
you can choose any FPGA board from digilent, terasis, xilinx etc provided it has HDMI port and could be coupled with enough BRAM or DRAM as per the video processing requirement….video processing is an intensive task and interfacing and RAM are most important factors in case