- This topic has 2 replies, 3 voices, and was last updated 11 years, 2 months ago by
.
-
Posts
-
I want to burn program into at89c2051 using serial communication but i am getting problem about software required to burn th at89c2051.Thank You!!!
com port (serial port) programmers for ATmel micro controllers are very rare now because everything is now based on USB. even converters are available for USB to RS232.
tell me why you require serial programmer.
one option is NXP’s P89V51 series micro controllers. they can be programmed serially throuch Flash Magic software.
you have to make hardware and download flash magic software
Hi,
If you need controller for mass production then AT89C51 or AT89S52 are good as they are cheaper. You need to design hardware for loading program in it. Another option is, you can purchase loader from the market.
If you are a student and need few programs to be tested, you can use P89V51RD2 from Philips. You can use flash magic and boot the controller from serial port.
However, philips has stopped production of this controller. So this is not a good option. Many china made ICs are coming into market but its not goos in quality.
- You must be logged in to reply to this topic.