- This topic has 1 reply, 2 voices, and was last updated 13 years, 1 month ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
|
I need to send data from a atmel ( 8051 ) uC, which i’m using in my project for monitoring.
I need AT commands that i’ll have to include in my program to send the data aquired from my uC.
MY gsm module is SIM300 v 7.03
pls send AT command
The following link provides details about commonly used AT commands