- This topic has 1 reply, 2 voices, and was last updated 15 years, 1 month ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi all,I am a newbee in electronics. I need your help. I am working on a project (6DOF Robotic Arm).I selected Hardware asMCU: Atmega16F_CPU: 16MhzServo: 7 Servo(NRS-785)LCD: 16×2(Standard)Is this possible to control 7 servos using one atmega16/32?I am trying to control one servo from atmega16 but i failed.Help Me Please.
hello karan,
to run servo from avr use its PWM channels… the atmega16/32 has 4 PWM channels so at a time you can use 4 servo motors… there are other ways but i wont gives you perfect results…
atmega64/128 has 6 PWM channels… i will let you know i f come accross any atmega which has more then 6 PWM channels…
al d bst
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.