EngineersGarage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise
You are here: Home / Topics / Regarding A6 GSM Module

Regarding A6 GSM Module

|

Electronics › Electronics › Regarding A6 GSM Module

  • This topic has 5 replies, 2 voices, and was last updated 8 years, 6 months ago by GANEEV SINGH.
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 12, 2016 at 5:31 am #4585
    varsha
    Participant

    Hi all,

     
      I purchased A6 GSM module,I faced dificulties in getting accurate NTP time.I Used +CCLK command it displays correct date but time is not as the local time.please suggest AT commands to Automatic update time zone similar as +CTZU .
     
     
     
     
    December 12, 2016 at 5:58 am #14268
    GANEEV SINGH
    Participant

    Hi Varsha

    You can use the same command to update date and time; AT+CCLK="yy/mm/dd,hh:mm:ss+zz". Here yy=year(last 2 digits), mm=month, dd=date, hh=hours, mm=minutes, ss=seconds and zz=deviation from GMT in 15 min. intervals i.e for india if IST=GMT+5:30 then zz=22.

    A successful response would be "OK".

    This should work

    December 12, 2016 at 6:47 am #14269
    varsha
    Participant

    Yess,I'll Try ..Thank you ;-)

    December 12, 2016 at 8:32 am #14270
    varsha
    Participant
    it displays +CCLK: "16/12/12,08:29:14+05"
    how can I set Timezone +05:30.Is there any AT command for A6 GSM modem..?? 
    December 16, 2016 at 5:02 am #14276
    varsha
    Participant

    Please someone help me

    December 26, 2016 at 4:51 pm #14297
    GANEEV SINGH
    Participant

    Try using AT+CSDF instead of AT+CCLK

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.
Log In

RSS Recent Posts

  • Can I make two inputs from one?? July 9, 2025
  • The Analog Gods Hate Me July 9, 2025
  • How to make string LEDs? July 9, 2025
  • Fixing board, Easy question HEX SCHMITT July 9, 2025
  • It's Amazing What A Buck And A Quarter.... July 8, 2025

Stay Up To Date

Newsletter Signup
EngineersGarage

Copyright © 2025 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media
Privacy Policy | Advertising | About Us

Search Engineers Garage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise