- This topic has 8 replies, 3 voices, and was last updated 9 years, 8 months ago by .
Viewing 9 posts - 1 through 9 (of 9 total)
Viewing 9 posts - 1 through 9 (of 9 total)
- You must be logged in to reply to this topic.
|
ELECTRONIC VOTING MACHINE USING 8051 LCD BASED PLEASE HELP ME TO MAKE DIAGRAM IN PROTEUS.
WHERE IS PROTEUS DIAGRAM
tell us what is your problem in making diagram?
sir in proteus 89c51 ther have no pin (20 for ground and 40 for vcc) then how will we give ground and vcc
it will work without Vcc and ground. even no need to connect external crystal
u just just give the location of hex file that you have made for your project.
sir but there have also some problem in coding . it show result always zero ….and sir if i want that there will 5 input what will be the chang in coding …..plz guide me
give me the link form where you have taken the project
http://www.engineersgarage.com/microcontroller/8051projects/LCD-based-voting-machine-AT89C51-circuit
sir and i also have tryed many time to implement on bread board but there have nothing display on lcd …….at proteus it is good and have work but on hardware it dose not work sir reply me fast because i have to submit within two days
everything seems to be correct. i think there should not be any problem. if u r not getting display on hardware there must be a problem in ur connections
thnx alot sir i have done.its ok and run