- This topic has 1 reply, 2 voices, and was last updated 13 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
the project shown “interfacing 8051 with PC serially can we use that for burning a program fin 8051”
though 8051 can be programmed with Serial interface, this project is not the exact way of burning your code on the microcontroller. the burning requires a complex set of instruction to be transferred from a master controller to the target controller. The master controller may be replaced with the PC as well.
Refer the datasheet of 8051 controller you are using for more details on this.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.