- This topic has 1 reply, 2 voices, and was last updated 11 years, 8 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi every 1, while instaling program From flash magic to microcontroler i am facing some problem. while doing so its showing “unable to connect,ensure only 1 application is running in the com,try to do by varying the baurd width”
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.