EngineersGarage

You are here: Home / Topics / Plz help for making the RFID

Plz help for making the RFID

|

Microcontroller › 8051 › Plz help for making the RFID

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 19, 2013 at 4:31 am #2491
    gopal
    Participant

    i will try to make the rfid ,so plz help me how to start this topic 

    June 19, 2013 at 4:56 am #9984
    hariprasath
    Participant

    hi

     

    RFID means two types is there , one is passive and another one is active , which one need to learn?

     

    June 19, 2013 at 2:31 pm #9988
    gopal
    Participant

    basically i need rfid modules need in making toll plaza 

    June 19, 2013 at 2:53 pm #9989
    BADARUDDING BIN TALANI
    Participant

    hi gopal…can u share any rfid project..it is my first project to do .pls .

    June 19, 2013 at 4:55 pm #9991
    gopal
    Participant

    i was not making any project related to the rfid .but i will try to make the project.when i make then i will share . 

    June 30, 2013 at 9:24 am #10067
    AJISH ALFRED
    Participant

    Hi Gopal,

    Which microcontroller are you using? There are lot of examples on RFID interfacing under the EG LABS section with different microcontrollers. Please refer them and post your doubts.

    EG LABS>MICROCONTROLLER 

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

Search Engineers Garage