EngineersGarage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise
You are here: Home / Topics / Pin number of AT89C51 not shown in “Digital clock using DS12C887 and 8051 microcontroller (AT89C51) in 12 hour mode” project

Pin number of AT89C51 not shown in “Digital clock using DS12C887 and 8051 microcontroller (AT89C51) in 12 hour mode” project

|

Projects › Projects › Pin number of AT89C51 not shown in “Digital clock using DS12C887 and 8051 microcontroller (AT89C51) in 12 hour mode” project

  • This topic has 1 reply, 2 voices, and was last updated 12 years ago by AJISH ALFRED.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 21, 2013 at 5:45 pm #4829
    Amol K
    Participant

    In the cicuit diagram for “Digital clock using DS12C887 and 8051 microcontroller (AT89C51) in 12 hour mode“, the pin no. of AT89C51 connecting to (LCD pin no.2 and +5V) and Ground through switch to adjust the mode am/pm labeled as Setmodeam_pm is not shown.

     

    July 18, 2013 at 7:17 am #10163
    AJISH ALFRED
    Participant

    Hi Amol,

    Thanks for let us know the mistake in the circuit diagram. For the time being kindly go through the description and the code to find the missisng pin number while we update the modified circuit diagram.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Log In

RSS Recent Posts

  • Fun with AI and swordfish basic July 19, 2025
  • using a RTC in SF basic July 19, 2025
  • Does US electric code allow branching ? July 19, 2025
  • Faulty heat air gun (dc motor) - problem to locate fault due to Intermittent fault July 19, 2025
  • Sump pit water alarm - Kicad 9 July 19, 2025

Stay Up To Date

Newsletter Signup
EngineersGarage

Copyright © 2025 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media
Privacy Policy | Advertising | About Us

Search Engineers Garage

  • Engineers Garage Main Site
  • Visit our active EE Forums
    • EDABoard.com
    • Electro-Tech-Online
  • Projects & Tutorials
    • Circuits
    • Electronic Projects
    • Tutorials
    • Components
  • Digi-Key Store
    • Cables, Wires
    • Connectors, Interconnect
    • Discrete
    • Electromechanical
    • Embedded Computers
    • Enclosures, Hardware, Office
    • Integrated Circuits (ICs)
    • Isolators
    • LED/Optoelectronics
    • Passive
    • Power, Circuit Protection
    • Programmers
    • RF, Wireless
    • Semiconductors
    • Sensors, Transducers
    • Test Products
    • Tools
  • Advertise