pic 18F452 interfacing with gps using CC2500 module

[Kaiwalya Anil Ghundare Patil]

Hello friends, We are using pic 18f452 .Our project is multipurpose warfield robot .We are interfacing pir sensor, fire sensor and gps to locate the position. We are using two microcontroller of pic 18f452 one at receiver and one at the transmitter. We are using cc2500 module to transmit data wirelessly. When the human is sensed using pir sensor it is displayed on the lcd at the receiver end. If the fire is detected then again it is displayed on the lcd at the receiver end. The gps will then display the location on the lcd at the receiver.The data is transmitted wirelessly using cc2500 to the receiver end.

Please help me  with the working code.

[Vara Ashishkumar]

First start to learn PIC controller configuration and programming in C.Refer the PIC tutorials in our website.

[Author]

Posts