- This topic has 3 replies, 3 voices, and was last updated 12 years, 7 months ago by .
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
|
Microcontroller › 8051 › my robot lost the SOCCER match(RF problem)
hello
every one
recently i participated in a robosoccer compitetion
unfortunately my opponent and me were using 434Mhz RF modules and
HT12E and HT12D ic for encoding and decoding. it became a big disaster.
none of them worked on the ground. but they worked if one of the ramote is used while the other one is switched off. so both of us lost the match.though my robot can kick the ball up to 7meters (robot size is 20 * 25 cm) with
BECAUSE OUR TWO BOTS WERE ONLY WIRRLESS OF ALL ROBOTS.
i came to know than HT12E and D ic are also having 8 address bits
if i use different adress for two robots will it work
or the frequency should be changed
im not able to find 315Mhz RF modules in my locality
please helpme with it
thanks in advance
You can use zigbee as well.
i dont know much about ZIGbee
how many channel it can provide
zigbee can send and Receive datas like serial port .