microcontroller based home automation over GSM

[Thumbi Paul Irungu]

How do we implement connection of micrcontroller to Mobile user via GSM network to enhance automated remote control

[vinod]

hey buddy

 

i hav done couple of such projects u can contact me in my mail id  [email protected]…..for doubts and clarification

 

 

i hav done gsm home automation using nokia 3310 phone were u send a msg to ur phone  interfaced with ur microcontroller using fbus

 

protocols

 

[Anonymous]

if you have done such projects please post them here or just mail them to me  –   [email protected]

 

a very much thanks in advance

 

 i hope u will surely help me…

[naveed]

@THUMBI PAUL

 

HI..COULD U PLZ SND THE CKT AND CODING OF GSM WHERE THE NOKIA 3310 IS USED USING 8051.MY MAIL ID IS..

 

[email protected]

 

 

THANKS

[naveed]

HI NILESH….I also have to control some automation through GSM but i need coding and ckt diagram using nokia 3310 bcoz it will easily buy…In our town siemens/ericsson sets mobile are not available.

 

So plz snd me to this mail id

[email protected]

Thanks

[Sam]

 I’d like to know about this as well. If anyone knows how to do this please let me know too. Thanks! 

 

Crestron

[bnm]

I am making it.I need some help pls

Can you contact me this site?

 

[Anonymous]

 Hello friends..

 

i m doing my 1st microcontroller project with the help of this site..

 

i hv came to know that only hex code can b burn into the 89c51..

 

please tell me how can i get that hex file of the c language code of the project-

 

“Celsius & Fahrenheit  Scale digital Thermometer using 89c51..

 

plz rply fast..

 

Thanks in advance..

[dagakshay]

use keil compiler…..

[dagakshay]

use keil compiler…..

[sudhakar]

i have done many projects on gsm module if u need any help contact [email protected] 

[sudhakar]

just u follow following steps to convert c file to hex file

 

1.download and install keil compiler

2.open keil and project–>new project–>give name–> ok–>atmel–>89s52–>0k–>n0–>file–>new–> copy ur code here and save with .c extension–>right click on source group–>add files to source group and brouse ur file –>ok–>buildtarget–>right click on target–>options for target–>set freq 11.0592–>output–>select create hex file–>0k–>ok–>build target.

 

then u find hex file at ur project location.

[Gudiya sharma]

 

Thank 4 ur reply,

 

Is Keil uvision2 is the right softwr which i need…?

[dagakshay]

yup keil uvision2 is an old version but it will work…. don’t doubt about the old version you can go with it….

[ruta]

even i want the coding and the ckt…pls reply asap

[Author]

Posts