- This topic has 1 reply, 1 voice, and was last updated 10 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hello guys. I just wanna ask, why our lcd can’t display an output. Everything is good. From hardware e.g, circuit down to software or the code. I need help guys on how are we going to display a 16X2 lcd. So we have a successful project and we can pass it. Thanks.
By the way the project that we were made is came from these site. http://www.engineersgarage.com/microcontroller/8051projects/liquid-level-alarm-AT89C51-circuit
I hope you would share your ideas and help us.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.