Isolate two power inputs from each other | Miscellaneous › Others › Isolate two power inputs from each other This topic has 1 reply, 2 voices, and was last updated 7 years, 11 months ago by Ashutosh Bhatt. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts May 1, 2016 at 3:08 pm #4450 GanParticipant Hi, Could someone point me in direction (article, project or schema) how to isolate two power inputs (A and connectors from each other? When A is connected it does not pass current to B connector? Also only one (A or is suppose to pass current to output connector C. Input connectors A and B are rated 5V and up to 6W, same as output C. Best regards, Gan May 3, 2016 at 5:45 am #13909 Ashutosh BhattParticipant that so simple. u can use change over type relay. connecte A and B with NC and NO terminals and C with commone terminal thats all Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In