Internet of Things Ultrasound using Power over Ethernet

[Sharifa]

Hi

I have a project for my Masters degree, "Internet of Things Ultrasound using Power over Ethernet"

my project will be implemented using different devices

for my PoE structure

For PD and PSE am using :

– Powered device(PD):  (TPS2378 Dev Kit) from Taxes Instruments : it gives an output voltage of 48V and operates in 25W power level.

– Power Supply Equipment (PSE): I still did not find a suitable PSE as all very expensive, I want to use (Cisco SB-PWR-INJ2-UK Power over Ethernet PoE+ Injector (30W/802.3at)) what is your advice in best PSE device?

 

After implementing my POE my PD will be connected to a DC/DC converter to lower down the voltage to 12V to operate the FPGA board (Stratix IV or V).

then my main struggle is to transfer data between the systems and let it display somthing in MatLab.

If there is any similar projects I would be thankful for your guidness.

 

 

 

 

 

 

 

[Author]

Posts