Continue to Site

EngineersGarage

You are here: Home / Topics / interfacing

interfacing

|

Microcontroller › 8051 › interfacing

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 25, 2011 at 5:30 pm #1222
    Ashish Angural
    Participant

    can anybody please give me the example that how we interface lcd with leds and seven segment display

     

    plz explain using c

    July 27, 2011 at 5:36 am #6526
    dagakshay
    Participant

    Hi ashish,

    will you please elobrate youself….

    August 21, 2011 at 1:44 am #6616
    Ashish Angural
    Participant

    i am new to mc and i want to run lcd, led, seven segments and dc motor together and for that i have writen a code just chech that wether this code is correct or not

    #include

    #include

    #define data P1

    sbit S1=P3^0;
    sbit S2=P3^1;
    sbit S3=P3^2;
    sbit motor=P3^3;
    sbit S4=P3^4;

    sbit RS=P2^0;
    sbit RW=P2^1;
    sbit E=P2^2;

    sbit A1=P0^0;
    sbit B1=P0^1;
    sbit C1=P0^2;
    sbit D1=P0^3;

    void ms_delay(unsigned int a)
    {
    unsigned int i,j;
    for(i=0;i {
    for(j=0;j<70;j++)
    {
    _nop_();
    }
    }
    }

    void sec_delay(unsigned int a)
    {
    unsigned int i,j;
    for(i=0;i {
    for(j=0;j<1000;j++)
    {
    ms_delay(1);
    }
    }
    }

    void ibit_left()
    {
    unsigned char i,a;
    while(1);
    {
    if(S1==0)
    {
    a=0xfe;
    for(i=0;i<8;i++)
    {
    P1=a;
    a=a<<1;
    a=a+0x01;
    ms_delay(500);
    }
    }
    }
    }

    void right_shift()
    {
    unsigned char i,a;
    while(1);
    {
    if(S2==0)
    {
    a=0xfe;
    for(i=0;i<8;i++)
    {
    P1=a;
    a=a>>1;
    ms_delay(500);
    }
    }
    }
    }

    void ibit_right()
    {
    unsigned char i,a;
    while(1);
    {
    if(S3==0)
    {
    a=0xfe;
    for(i=0;i<8;i++)
    {
    P1=a;
    a=a>>1;
    a=a+0x80;
    ms_delay(500);
    }
    }
    }
    }

    void even_segments()
    {
    unsigned char i,a[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x98};
    while(1);
    {
    if(S1==0)
    {
    for(i=0;i<=9;i++)
    {
    if(i%2==0)
    P2=a;
    ms_delay(500);
    }
    }
    }
    }

    void odd_segments()
    {
    unsigned char i,a[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x98};
    while(1);
    {
    if(S2==0)
    {
    for(i=0;i<=9;i++)
    {
    if(i%2==1)
    P2=a    ;
    ms_delay(500);
    }
    }
    }
    }

    void numbers()
    {
    unsigned char i,a[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x98};
    while(1);
    {
    if(S3==0)
    {
    for(i=0;i<=9;i++)
    {
    P2=a    ;
    ms_delay(500);
    }
    }
    }
    }

    void lcd_cmd()
    {
    data=ACC;
    RS=0;
    RW=0;
    E=1;
    ms_delay(10);
    E=0;
    }

    void lcd_data()
    {
    data=ACC;
    RS=1;
    RW=0;
    E=1;
    ms_delay(10);
    E=0;
    }

    void lcd_initialize()
    {
    ACC=0x38;
    lcd_cmd();
    ACC=0x38;
    lcd_cmd();
    ACC=0x38;
    lcd_cmd();
    ACC=0x06;
    lcd_cmd();
    ACC=0x0C;
    lcd_cmd();
    }

    void lcd_puts(unsigned char *a)
    {
    while(*a!=’’)
    {
    ACC=*a;
    lcd_data();
    a++;
    }
    }

    void PWM(unsigned char Ton)
    {
    motor=0;
    ms_delay(Ton);
    motor=1;
    ms_delay(100-Ton);
    }

    void clkwise()
    {
    unsigned char i;
    for(i=0;i<=5;i++)
    {
    A1=0;
    B1=C1=D1=1;
    ms_delay(250);

    B1=0;
    A1=C1=D1=1;
    ms_delay(250);

    C1=0;
    A1=B1=D1=1;
    ms_delay(250);

    D1=0;
    A1=B1=C1=1;
    ms_delay(250);
    }
    }

    void anticlkwise()
    {
    unsigned char i;
    for(i=0;i<=5;i++)
    {
    D1=0;
    A1=B1=C1=1;
    ms_delay(250);

    C1=0;
    A1=B1=D1=1;
    ms_delay(250);

    B1=0;
    A1=C1=D1=1;
    ms_delay(250);

    A1=0;
    B1=C1=D1=1;
    ms_delay(250);
    }
    }

    void main()
    {
    lcd_initialize();
    while(1);
    {
    if(S1==0)
    {
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“1BIT LEFTSHIFT”);
    ibit_left();
    }
    else if(S2==0)
    {
    ACC=0x01;
    lcd_cmd();
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“RIGHT SHIFT”);
    right_shift();
    }
    else if(S3==0)
    {
    ACC=0x01;
    lcd_cmd();
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“1BIT RIGHTSHIFT”);
    ibit_right();
    }
    while(1);
    {
    if(S1==0)
    {
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“EVEN NUMBERS”);
    even_segments();
    }
    else if(S2==0)
    {
    ACC=0x01;
    lcd_cmd();
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“ODD NUMBERS”);
    odd_segments();
    }
    else if(S3==0)
    {
    ACC=0x01;
    lcd_cmd();
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“DECIMALS”);
    numbers();
    }
    }
    while(1);
    {
    motor=0;
    sec_delay(10);
    motor=1;
    sec_delay(5);
    PWM(30);
    }
    while(1)
    {
    if(S1==0)
    {
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“MOTOR CLOCKWISE”);
    clkwise();
    }
    else if(S2==0)
    {
    ACC=0x01;
    lcd_cmd();
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“MOTOR ANTICLOCKWISE”);
    anticlkwise();
    }
    }
    }
    }

    Pls check this code

    August 22, 2011 at 3:04 pm #6622
    Ashish Angural
    Participant

    sorry for inconvenience it is because i had posted it from mobile thats why its look like this
    i can change it soon

    October 5, 2011 at 5:41 pm #6679
    Ashish Angural
    Participant

    check this…

     

     

    #include<reg51.h>
     
    #include<intrins.h>
     
    #define data P1
     
    sbit S1=P3^0;
    sbit S2=P3^1;
    sbit S3=P3^2;
    sbit motor=P3^3;
    sbit S4=P3^4;
     
    sbit RS=P2^0;
    sbit RW=P2^1;
    sbit E=P2^2;
     
    sbit A1=P0^0;
    sbit B1=P0^1;
    sbit C1=P0^2;
    sbit D1=P0^3;
     
    void ms_delay(unsigned int a)
    {
     unsigned int i,j;
     for(i=0;i<a;i++)
     {
      for(j=0;j<70;j++)
      {
       _nop_();
      }
     }
    }
     
    void sec_delay(unsigned int a)
    {
     unsigned int i,j;
     for(i=0;i<a;i++)
     {
      for(j=0;j<1000;j++)
      {
       ms_delay(1);
      }
     }
    }
     
    void ibit_left()
    {
     unsigned char i,a;
     while(1);
     {
      if(S1==0)
      {
       a=0xfe;
       for(i=0;i<8;i++)
       {
    P1=a;
    a=a<<1;
    a=a+0x01;
    ms_delay(500);
       }
      }
     }
    }
     
    void right_shift()
    {
     unsigned char i,a;
     while(1);
     {
      if(S2==0)
      {
       a=0xfe;
       for(i=0;i<8;i++)
       {
    P1=a;
    a=a>>1;
    ms_delay(500);
       }
      }
     }
    }
     
    void ibit_right()
    {
     unsigned char i,a;
     while(1);
     {
      if(S3==0)
      {
       a=0xfe;
       for(i=0;i<8;i++)
       {
    P1=a;
    a=a>>1;
    a=a+0x80;
    ms_delay(500);
       }
      }
      }
    }
     
    void even_segments()
    {
     unsigned char i,a[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x98};
     while(1);
     {
      if(S1==0)
      {
       for(i=0;i<=9;i++)
       {
    if(i%2==0)
    P2=a;
    ms_delay(500);
       }
      }
     }
    }
     
    void odd_segments()
    {
     unsigned char i,a[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x98};
     while(1);
     {
      if(S2==0)
      {
       for(i=0;i<=9;i++)
       {
    if(i%2==1)
    P2=a;
    ms_delay(500);
       }
      }
     }
    }
     
    void numbers()
    {
     unsigned char i,a[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x98};
     while(1);
     {
      if(S3==0)
      {
       for(i=0;i<=9;i++)
       {
        P2=a;
        ms_delay(500);
       }
      }
     }
    }
     
     
    void lcd_cmd()
    {
     data=ACC;
     RS=0;
     RW=0;
     E=1;
     ms_delay(10);
     E=0;
    }
     
    void lcd_data()
    {
     data=ACC;
     RS=1;
     RW=0;
     E=1;
     ms_delay(10);
     E=0;
    }
     
    void lcd_initialize()
    {
     ACC=0x38;
     lcd_cmd();
     ACC=0x38;
     lcd_cmd();
     ACC=0x38;
     lcd_cmd();
     ACC=0x06;
     lcd_cmd();
     ACC=0x0C;
     lcd_cmd();
    }
     
    void lcd_puts(unsigned char *a)
    {
     while(*a!=’’)
     {
      ACC=*a;
      lcd_data();
      a++;
     }
    }
     
    void PWM(unsigned char Ton)
    {
     motor=0;
     ms_delay(Ton);
     motor=1;
     ms_delay(100-Ton);
    }
     
    void clkwise()
    {
     unsigned char i;
     for(i=0;i<=5;i++)
     {
      A1=0;
      B1=C1=D1=1;
      ms_delay(250);
     
      B1=0;
      A1=C1=D1=1;
      ms_delay(250);
     
      C1=0;
      A1=B1=D1=1;
      ms_delay(250);
     
      D1=0;
      A1=B1=C1=1;
      ms_delay(250);
      }
    }
     
    void anticlkwise()
    {
     unsigned char i;
     for(i=0;i<=5;i++)
     {
      D1=0;
      A1=B1=C1=1;
      ms_delay(250);
     
      C1=0;
      A1=B1=D1=1;
      ms_delay(250);
     
      B1=0;
      A1=C1=D1=1;
      ms_delay(250);
     
      A1=0;
      B1=C1=D1=1;
      ms_delay(250);
     }
    }
     
    void main()
    {
     lcd_initialize();
     while(1);
     {
      if(S1==0)
      {
       ACC=0x80;
       lcd_cmd();
       lcd_puts(“1BIT LEFTSHIFT”);
       ibit_left();
      }
      else if(S2==0)
      {
       ACC=0x01;
       lcd_cmd();
       ACC=0x80;
       lcd_cmd();
       lcd_puts(“RIGHT SHIFT”);
       right_shift();
      }
      else if(S3==0)
      {
       ACC=0x01;
       lcd_cmd();
       ACC=0x80;
       lcd_cmd();
       lcd_puts(“1BIT RIGHTSHIFT”);
       ibit_right();
      }
      while(1);
      {
       if(S1==0)
      {
       ACC=0x80;
       lcd_cmd();
       lcd_puts(“EVEN NUMBERS”);
       even_segments();
      }
      else if(S2==0)
      {
       ACC=0x01;
       lcd_cmd();
       ACC=0x80;
       lcd_cmd();
       lcd_puts(“ODD NUMBERS”);
       odd_segments();
      }
      else if(S3==0)
      {
       ACC=0x01;
       lcd_cmd();
       ACC=0x80;
       lcd_cmd();
       lcd_puts(“DECIMALS”);
       numbers();
      }
      }
      while(1);
      {
       motor=0;
       sec_delay(10);
       motor=1;
       sec_delay(5);
       PWM(30);
      }
      while(1)
      {
       if(S1==0)
       {
       ACC=0x80;
    lcd_cmd();
    lcd_puts(“MOTOR CLOCKWISE”);
    clkwise();
       }
       else if(S2==0)
       {
       ACC=0x01;
    lcd_cmd();
    ACC=0x80;
    lcd_cmd();
    lcd_puts(“MOTOR ANTICLOCKWISE”);
    anticlkwise();
       }
      }
     }
    }
     
     
     
  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Copyright © 2023 WTWH Media LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media
Privacy Policy | Advertising | About Us

Search Engineers Garage