- This topic has 1 reply, 2 voices, and was last updated 14 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi all
Im trying to interface rf receiver with that of electrical component like bulb so that i can switch it on and off using remote control.Is this possible can any one please help me out
Regards
Ambix
Ofcourse possible.
I suggest you to use rf module pair tws/rws 434. Go through the datasheet. All you have to do is to connect the data_out pin of receiver to a relay through a driving transistor. Use common transistors like sl100. On the output side of the relay you can connect your bulb. Give 5v to the data_in of transmitter. You should be with in a maximum range of 30 meters
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.