interfacing of load cell with pic microcontroller

[kaustubh gomase]

I want to interface load cell with pic microcontroller and display the weight on lcd and then according to the weight I want to display information related to the weight and then I want to interface a counter circuit….. All this is related to the gym automation…First The user will sit on the biceps machine and then his or her weight is calculated and then according to the weight number of sets of that particular machine will be displayed on the lcd and then the person starts using the machine… I want to keep the track of the number of sets and display the count on lcd or 7 seg display

[sanket]

Hav^e u did that project   ^{of loadcell.If u did please help me.my emailid-sanket.choug}[email protected]

[Koteswararao u]

hai sanket if you completed load cell project,can you send code for this project.

my mail id:[email protected]

[Ashutosh Bhatt]

your project idea is really very good.

the load cell gives analog voltage output. that is to be converted into digital 

rest of the things you can easily do using micro controller programming

so you need to first get the digital equivlant output. then you have to calibrate the output in terms of weight.

 

[Omkar Pasalkar]

hey ashutosh , im also doing such kind of project for load cell, so plz send me that code here is my mail id : [email protected]

[Saatwik]

please visit the link, here you will get how to take analog input https://www.engineersgarage.com/embedded/arduino/how-use-analog-input-and-analog-output-arduino-board

Now, you can get analog input from load cell after this jus put 1KG load to calibreate it for example if you getting 376 analog value at 1KG just divide the analog value with 376 to get exact value of load.

[datta suryawanshi]

Thanks a lot for providing such information with us.This blog is very helpful for me. It helped me in so many ways. Really I appreciate your efforts. BCA in Sharda University

[Author]

Posts