- This topic has 1 reply, 2 voices, and was last updated 7 years, 3 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
|
Microcontroller › AVR › interfacing atmega 32 with servo motor
i ‘ve never dealt with servos b4, i need to know how to control servo motor with atmega 32
using pwm’s,, idon’t really understand how to calibrate duty cycle with the angle of the motor,,and by which degrees can i change the motor,,
Hi
Generally servo motors work on 20ms pulse cycle out of which the ON time decides it's angle. PWM concept can be used in such cases.
This link should help: https://www.engineersgarage.com/embedded/avr-microcontroller-projects/atmega16-servo-motor-circuit