Help needed to operate RC servo from port b3 on pic16F628A

[al gea]

Hi,

Trying to operate servo on portB.3 on PIC16F628A.  Need only to get full 180 and then return. This is to operate choke on generator, i.e need full rotation for choke on and then return for choke off.  Any help greatly appreciated. Have programmed PIC with flowcode 5.  But servo option is unavailable on the Pic because flowcode needs 2 ccp to move servo.  Pretty much a novice so any advice as simple if possible.

[al gea]

THANKS ANYWAY GUYS PROBLEM SOLVED. EVENTUALLY FOUND THREAD THAT HELPED ME.

REGARDS

AL GEA.

[Author]

Posts