- This topic has 1 reply, 2 voices, and was last updated 12 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
im trying to connect a s-beam load cell to a 12-bit ad converter(mcp3208)..
load cell full-range output = 3mv and maximum input my adc takes is 5v.
please suggest an op-amp which has enough gain to amplify 3mv to 5v..
thanks a ton!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.