- This topic has 3 replies, 2 voices, and was last updated 10 years, 10 months ago by .
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
|
Microcontroller › AVR › GPS interfacing with ATmega16
i am using GPS VK16U6. i have connected Vcc and GND of GPS with Atmega16 and Tx of GPS with Rx of uc and vice-versa.
the output is showing only $ sign and some garbage value which is constantly changing. Plz help me…..
Hi Kamran ,
Could you compare that data with data format mentioned in the datasheet of GPS and see if there is a match or not. Is it possible for you to send a snapshot of the output ?
This is what I am getting when I have coded to get the last line of the format $GPGGA…..