Electronics › Electronics › embedded cloud storage
- This topic has 16 replies, 3 voices, and was last updated 13 years, 8 months ago by
kiran.
-
AuthorPosts
-
June 20, 2012 at 8:57 pm #1848
kiran
Participantthe whole idea of cloud storage system was implemented using embedded systems completely and implementation also ready, thanks for friends who helped me with few components. if any body interested in knowing always welcome.TC
June 21, 2012 at 1:11 am #8101AJISH ALFRED
ParticipantCloud storage system….! Simply Great!!!
Which controllers you’ve used?
June 21, 2012 at 2:08 pm #8105Amrith
ParticipantHi kiran,
Good one, why don’t you share your project on Engineers Garage.
June 21, 2012 at 5:37 pm #8108kiran
Participanti have used P89V51RD2 microcontrollers…and nearly 5 micro controllers have been used. and ya pal soon i will share it, once i had done preparng report on it.
but as understanding, we have developed and controller node,2 storage severs(like virtual servers) same as used for cloud storage sytem and RS 485 bus has been used to communicate and also an master user has been developed who can see the stored data from different hard ware systems
but its an limited memory application.
June 21, 2012 at 5:42 pm #8109kiran
Participantto be clear, we are not using any PC and whole idea inplemented using only ic’s and major credit goes to person helped from isro:)
June 22, 2012 at 2:12 am #8112AJISH ALFRED
ParticipantHi Kiran,
We are waiting for your article on the project.
May I know which all communication protocols and the memory chips you’ve used?
June 29, 2012 at 1:57 am #8150kiran
Participantmain communication protocol we had used is RS 485…whole module will work with this network and an controller was develped to communcate between the modules…apart from this I2C has been used too…one main part of the project is that developing the proprietry packets has been designed too…so all communcation via RS 485 and as in form of packets
June 29, 2012 at 1:34 pm #8152AJISH ALFRED
ParticipantThanks Kiran,
That’s really awesome.
June 29, 2012 at 5:55 pm #8154kiran
Participantthanks pal…
July 4, 2012 at 12:50 pm #8188kiran
Participanthalo pals…one small doubt how to submit our work here and do i have attatch code too.
July 4, 2012 at 9:22 pm #8191AJISH ALFRED
ParticipantHi,
You can send it to the following mail id
You can send code, working vedio anything related with your work.
July 11, 2012 at 12:57 am #8234kiran
Participantvideo !!! is it necessary and source code too?
July 11, 2012 at 12:58 am #8235kiran
Participantthanks pal…
July 11, 2012 at 8:47 pm #8248AJISH ALFRED
ParticipantHi Kiran,
The projects being posted in engineers garage are ment for others to try out so that they can improve their knowledge and may be design a better one later. If you post the source code also then only it would be easy for others to try the same. If the source code is too big or you haven’t properly documented it, then just post the logic.
Video is not necessary, but if there is any, you can post it also.
Personally, I’m waiting for you post.
July 18, 2012 at 4:38 pm #8289kiran
Participantsorry ya i will soon mail to it…i was bit busy in my submission sorry for that and ya my report is completely ready and will add source code also…hey any restriction about pages or as like ieee formats and all pal and soon if i get answer i ll mail the work
-
AuthorPosts
- You must be logged in to reply to this topic.