- This topic has 1 reply, 2 voices, and was last updated 10 years, 11 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
plz tell me and guide me how to convert the square wave in to sine wave plz give me the circuit and complete data
You can use a 2nd order low pass filter made from an inductor (in series with the AC) and a capacitor to neutral. You will also need a resistor.
1 Henry and 10uF form a 2nd order low pass filter that will attenuate the higher order frequencies from the sq wave and make the output signal more sinusoidal in nature. It might work fine or it still might give your TV problems if it is particularly sensitive to harmonics.
The resistor is needed to keep the Q of the circuit low and prevent high ringing voltages.
Q = 1RLC−−√ = 3.16 using the values above.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.