- This topic has 2 replies, 3 voices, and was last updated 11 years, 7 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
you have to use audio ADC chips readily available in market from TI or from NXP or from Analog Devices etc.
there are several such ADC chips available with very high resolutions of 16 bit to 24 bit.
you have to interface this chip with your host micro controller device.
Hi Manos,
Here is a good reference for you
http://www.engineersgarage.com/tutorials/circuit-design-pulse-amplitude-modulation
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.