- This topic has 1 reply, 2 voices, and was last updated 13 years, 3 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
|
now I have some doubt on controlling of servo motors
if I give pulses of 1.5 ms at 50 hz then motor will move to position 90 deg.
now if i want to take it back to 0 deg position then will it work if I supply 1 ms pulse at 50 hz.
is there any need to continuously supply pulses for retaining position.
what if pulses are stopped?
dude servo motor works on PWM…so for a standard servo,
1ms @50 hz – 0 degree
1.5ms @50 hz – 90 degrees
2ms @50 hz – 180 degrees
if u give 1.5ms @50 hz thn it wil mov to 90 degrees position and if u apply to it 1ms pulse @ 50 hz thtn it will again go to 0 degrees