- This topic has 4 replies, 5 voices, and was last updated 13 years, 6 months ago by .
Viewing 5 posts - 1 through 5 (of 5 total)
Viewing 5 posts - 1 through 5 (of 5 total)
- You must be logged in to reply to this topic.
|
Miscellaneous › Others › connect mobile to hyperterminal
hey friends,
can any one help me out in connecting mobile to hyperterminal through usb and operate its functionalities through hyprterminal
such as send message with help of AT commands etc.
Which cellphone are you using ?
let me take nokia 7210. or nokia 5233 how to connect these to terminal……
dear no cell phone allows AT command interface through usb…… u have to use GSM Modem….. like sim 300dz or sim 900 dz..
Following mobile sets support AT command sets:
Nokia 6630, sony ericsson t610,sony ericson t68, nokia 6600,nokia 6210.
For nokia u can install nokia pc suit and connect it through via usb cable. Nokia just support sending text message from pc to cell phone, it does not support receiving sms AT commands.
AT commands tutorial is available here:
http://www.developershome.com/sms/atCommandsIntro.asp
if u want to do two way communication then sony ericson t610 is best.
Good luck.