- This topic has 5 replies, 3 voices, and was last updated 7 years, 10 months ago by .
Viewing 6 posts - 1 through 6 (of 6 total)
Viewing 6 posts - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
|
Hai Everyone,
I would like to thank you for Engineere Garage. I am doing my final year project like "Embedded system based telemedicine system"
In my project like through sensors i should collect the information like heartbeat, temperature, oxygen saturaton, height and weight and image. so please give some ideas like how to start this project.
How to interface all this sensor to the microcontroller and how i should send all this information to the expert doctor using GSM Module.
If u got any ideas regarding which sensors as to use and coding please share to my mail:[email protected]
Thank you
first u must get good and accrate sensor for what u r talking? the sensor available in maket are fake sensors, like heart beat sensor, oxygen sensor etc.
find out the real sensors and the start project
I was collected sensors like Pulse oximeter, using this sensor i am calculating heartbeat with oxygen saturation.and LM35 Temperature sensor used to calculate temperature. Every information i am going to displaying on Lcd. lOAD CELL Sensor to weight measurement.
I was done all my project seperately(single program for each sensor), now my work is to compact all this programs into a single program i was struck in that part, i am getting lot of errors and not getting output.
I don't no what to do?
if u hv tested all sensors then its really good. now whats the problem?
just use big LCD like 20×4 to display all information at the same time. which micro controller u r using? use AVR ATmega16/32 micro controller with 8 channel in built ADC
so u can connect many sensors at a time
Sir I am doing project in Proteus The title of our project is stimulation of microgrid I am facing problem in coding .Microcontroller 8259
Contact no: 9717927616
Help me as soon as possible
Contact me soon for more explanation
more details please