- This topic has 1 reply, 2 voices, and was last updated 13 years, 9 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
|
Microcontroller › 8051 › cc2500
I want to configure cc2500 by using a AT89c51 and i could configure different registers via SPI but i am not getting how to bring the module in transmitting or receiving mode, I didn’t find any register to bring it in transmitting or receiving mode.
please help me……..
thanks in advance……
have u connect ur microcontroller to PC USING RS 232 serial communication…..
to trasmit and recieve you have to select the mode of serial communication registers if you use RS 232