atmega128+enc28j60 | Microcontroller › AVR › atmega128+enc28j60 This topic has 1 reply, 2 voices, and was last updated 10 years, 9 months ago by AJISH ALFRED. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts June 20, 2013 at 8:18 am #2493 rabin nepalParticipant hi all, i am doing the project An AVR microcontroller based Ethernet device atmega32 was used in the project there. but i need to do it in atmega128 mcu.so i would be thankful if anyone could provide me with the hardware connection of atmega128 and enc28j60. any help will be appreciated. July 12, 2013 at 4:57 am #10134 AJISH ALFREDParticipant Hi Rabin, SInce it is using the SPI bus for interfacing you can use the same connection which you can find in the previous project with atmega32. All you need is to find out which are the four SPI pins of atmega128, refering the pin diagram will help. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In