- This topic has 2 replies, 3 voices, and was last updated 7 years, 12 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
|
Microcontroller › Arduino › ARDUINO WITH XBEE
Hello,
Need code for Wireless Communication between Two Arduino MEGA Boards using
XBEE.
1. XBEE CONNECTED TO 1ST ARDUINO MEGA BOARD (TRANSMITTER)
2. 2nd ARDUINO BOARD RECEIVES THE DATA FROM 1st ARDUINO AND DISPLAYS IT,
AND SEND TO 3rd ARDUINO BOARD ( TRANSCEIVER )
3. 3rd ARDUINO BOARD DISPLAYS DATA ( RECEIVER )
1. If 2nd ARDUINO BOARD FAILS TO RECEIVE DATA, (IN CASE POWER OFF) , DATA TO
BE SENT DIRECTLY TO THE ARDUINO 3 BOARD FROM 1ST BOARD
PLEASE GIVE RESPONCE, IT IS POSSIBLE TO IMPLEMENT. PLEASE AT LEAST SAMPLE
CODE.
Hi,
It will work.You need to make 1st microcontroller as a Zigbee cordinator and other 2 are zigbee router then its going to work.
ZEEGBEE works on serial protocol. so that should not be any problem