- This topic has 1 reply, 2 voices, and was last updated 13 years, 5 months ago by
.
-
Posts
-
hi , i am working on ampire 128×64 glcd with ks0108 controller, i have connections and program for it, its working in simulation but i cannot understand its program and i want to write my own , but i don’t know how to program it and how to send and receive data etc. Actually i need its datasheet but i cannot find it, whenever i searched i found datasheet of ks0208 driver IC , will it help me? and how to find datasheet of glcd? plz help me
Hi,
Your GLCD module using two KS0108 driver chips. The pinouts from the modules are actually pinouts from the driver chips itself.
Here is a link which I found for your module.
http://www.projet.de/seiten_ebay/seiten_ebay_modlcd/AG-128×64.pdf
The data is not at all sufficient for a programmer. Your better search for datasheet of GLCD using the same kind of driver chip setup, and I’m sure the operation will be more or less same.
- You must be logged in to reply to this topic.