- This topic has 2 replies, 2 voices, and was last updated 11 years, 2 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
i want to drop down voltage from 230 voltage into 5 voltage without using transformer,only simple resistor and capacitor network.
Possible. Use a two resistor in potential divider manner.
Design the circuit in such a way that the values and power ratings of the resistors are with in the safelimilt.
Refer any basic electronic text book to get the equations for potential divider and use V^2/R to calculate the power consumption of each resistor, should not be more than 0.25 for standard quarter watt resistor.
Use a capacitor of about 100uF and 230V for safe use at the output of the potential divider circuit.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.