- This topic has 1 reply, 2 voices, and was last updated 11 years, 3 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
hello engineers
guys i have one doubt about temperature snesor
i just wanna know that is it compulsary to always connect reset,enable etc switches to microcontrollers
because pins where we connect reset or enable is already in use ….according to circuit diagram of temperature sensor
plzzzz help me
as soon as possible
as i have to complete my project for 6 weeks training
Hi Sharandeep,
The Reset pin should be pulled up or pulled down according to the microcontroller specification. If it is negative triggered it should be pulled up and if it is positive triggered pull it down. Otherwise the controller may get automatically reset.
Please post the circuit digram so that I can help you better.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.