- This topic has 1 reply, 2 voices, and was last updated 12 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
how we connect photodiode’s output with LM 124 low power quad op-amp
please reply immediatly and possitive
Hi Dharmrajsinh,
Connect the photodiode in reverse biased condition. Positive pin to ground and the negative pin to positive through a resistor not less than 10K. Take the output to lm124 from the point where the negative pin of photodiode joints with the resistor.
GND
+pin photodiode – pin —- 10K resistor
VCC|
|
LM124
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.