8051 timer | Microcontroller › 8051 › 8051 timer This topic has 1 reply, 2 voices, and was last updated 10 years, 7 months ago by umar farrok. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts August 21, 2013 at 4:52 pm #2599 RameshParticipant How to start and stop the 8051 timer with pin 3.2 and p3.3 (gate = 1) I need a simple example program. September 30, 2013 at 12:33 pm #10497 umar farrokParticipant first you have to be clear you create a delay by using hardware or software delay by using timer circuit or using timer calculation in the code depends upon that you have to choose your pin as gate is 0 or gate is 1 Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In