- This topic has 2 replies, 2 voices, and was last updated 14 years, 11 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
how to interconnect 3.5mm audio input jack aith audio output jack…
the image above is not complete… go for this link http://www.avatarhosting.net/pics/41346/19102010567.jpg …
the output jack has six terminals (back) and three (front)…
I searched for this on google but could not find a thing…. Schematics would be helpful…
Thankx in advance…
HI Habib,
By using multimeter first find out, that which wire connect with Jack (Jack have three segments) find the each wire for each jack. Then put the Jack in connecter and again with multimeter check the wire with the connector Pins(you have six pins). you will get 3 pins that is connected with the Jack.
in multimeter use continuty checking.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.